In This Section
|Battery Terminal Connectors (Lugs)
Our Battery Terminal Adapters are used for mounting electrical leads
to battery terminals on industrial lift trucks, tractor trucks, and many
military applications for the US Army, Navy, Marines, and Coast Guard.
The basic shape style is for A26 battery posts.
This product is manufactured at our Greenville manufacturing site to
the following US military and commercial specifications. Quantity
discounts are available. Minimum order is 25 adapters of either positive
(ECVC #6581) or negative (ECVC #6583) type. If you need more information
or would like to place an order,
Adapter, Battery Terminal
The General Services Administration has authorized the use of this
commercial item description (CID) as a replacement for
MS75004G, which are canceled.
1.0 Abstract. This CID covers terminal adapters for mounting
and fastening positive or negative electrical lead to tapered battery
terminals utilizing the nuts and bolts provided within the terminal
adapter (see figure 1).1.2 Classification. Terminal adapters shall be of the
Type I - Positive
Type II - Negative2.0 Salient Characteristics.2.1 Materials. Materials shall be as specified herein.
Materials shall be free of defects which adversely affect performance or
serviceability of the finished product. The use of recovered material
made in compliance with regulatory requirements is acceptable providing
that all requirements of this CID are met.2.1.1 Body. The body of the terminal adapter shall be made
from a lead-antimony alloy having 4 to 7.5% antimony, not more than 1%
materials which are neither lead nor antimony, and the remainder lead.2.1.2 Insert. The insert used in the terminal adapter shall be
made of low carbon steel having minimum properties of 30,000 psi tensile
strength, 20% elongation, .047 inch thickness.2.1.3 Bolt and Nuts. The bolts and nuts used for clamping to
the battery terminal post and for the mounting of leads shall be made of
steel SAE Grade I equivalent or better and plated with zinc chromate or
AMSC N/A - FSC 5940
Distribution Statement A. Approved for public release;
distribution is unlimited.
Figure 1. Battery Terminal Adapter Configuration.
Identification No. PIN Former
MS Part No.A.
DIA Small End Max/MinTerminal
Note: Not to Scale.
- Dimensions are in inches. Unless otherwise specified,
are +/- .015.
- Clearance for bolt holes shall be suitable for bolts in drawing.
ISO 9001:2008 certified since January 2004. Current Certification 9001-2008, Certificate # US00011777 to manufacture wooden picture frames
and battery terminal lugs as well as packaging, labeling, and distribution of small batteries and cobalt drill bits.